Tag Archives: dock maintenance

3 Tips to Get Your Dock Ready for Spring & Summer

Get ready to get back on the water! While we are currently in the middle of an extreme cold period with about a foot of snow in Indiana, we’re also about a month and a half away from Spring. No more cold weather! This means it is time to get all marine equipment ready for the upcoming season. Those that don’t prepare well will be sorry. If a piece of equipment got damaged by winter weather, ill-prepared waterfront owners will be stuck waiting to get on the water. And once dock company’s schedules start to get full it can take weeks to get something repaired. Today we’ll look at what to inspect to make sure your waterfront will be good to go in Spring.

How to Get Your Dock Ready for Boating Season

1. Inspecting Your Dock

Winter is harsh on docks. Snow and ice aren’t like rain in the summer that just drips right off, they pile on top and stay for a long time. So after sitting on top of a dock for several days or weeks, the weather starts to cause damage. So the first thing we should inspect when the weather is nice enough is the dock. First, inspect the decking. Make sure the material looks just as good as before with no rotting, splintering, cracks, or warps. Once you’ve noted the condition of the decking, move onto checking the frames. Look underneath your decking and make sure the frames aren’t warped or rusted. Make sure you notice if your dock is looking like it is sitting in the water lower than usual. It could be the entire system, or just one finger sitting a little low. If that’s the case, then the floats are damaged. Finally, inspect the anchoring and make sure it isn’t rusted or broken.

Now if you noticed any damage, it’s time to make sure to get it fixed now before the season starts. Fixing damaged decking, floats, or anchoring are small problems that can be fixed if caught early. These are all repairs that can be expensive of up to a few thousand dollars, but it’s nothing compared to spending tens of thousands on a brand new dock.  If the frames become severely warped or rust and break, then you’ll unfortunately probably have to replace the entire dock. Having an idea of what the damage on your dock is before you call in can help put your nerves at ease rather than waiting on a diagnosis.

2. Examining Your Boat Lift

Snow isn’t a real issue on boat lifts, but ice is. Instead of worrying about warping and cracking, you’ll need to worry if the lift is operational. Before we begin, always check your owner’s manual to see proper winterization techniques recommended from your manufacturer. There a lot of things that can get damaged during the winter on a boat lift. You could find damaged bolts, winches, power units, cables, bunks, or guides. After visually inspecting for wear and tear on any of these parts, it’s a good idea to cycle your lift up and down to make sure it’s working as intended. If you have a cable lift, be sure to listen closely and make sure you hear no snapping or noises coming from the cables. Unfortunately you can’t really replace a cable until it breaks, but it’s good to know it is coming rather than be surprised. For hydraulic lift owners, check your fluid and make it is filled to the appropriate level recommended by your manufacturer. Most issues and repairs needed for lifts will have to be dealt with by an expert. Fortunately, there are many experts with several years of experience at Deaton’s Waterfront Services.

Another aspect of getting your lift ready for the season is the canopy. Lift owners know to remove their canopy and store it for the winter to prevent tearing over the winter. If you leave a canopy on during the winter, snow is going to pile on top of it and destroy it. Call your local lift dealer and schedule them to store and reinstall your canopy every winter and fall. It will save you from having to replace a vinyl each season due to poor care.

3. Checking Your Seawall

The last piece of equipment you need to inspect is your seawall. Snow and ice will also warp and abuse a seawall during the winter. As water freezes and forms a layer of ice, it will push up against a seawall and try to morph it. As the sun appears during the day, it will cause the ice to start to melt and crack. The problem is, at night it will all refreeze and beat against the seawall. This constant cycle will damage the seawall over time and cause it to crack, warp, have gaps, and leak. If a seawall is well made with the right material, it will last for many decades but unfortunately you can never predict when nature will decide to ruin those plans. Inspecting the wall is simple, just walk along and inspect for warped metal, gaps, or leaks. If you notice a problem it will need to be fixed immediately before more damage piles up.

There is a way to help combat the damage that ice can throw at a seawall. If you own a bubbler, it will circulate the water throughout the winter never giving it a chance to settle and freeze. This will help protect anything you may have in the water including a dock, lift, or seawall. It is also helpful in the summer time to get rid of debris such as stray logs.

Final Thoughts To Get Rid of Winter

Getting your equipment working with plenty of time to get your boat prepared for the season is the best thing you can do for your future self and your property. While having damaged equipment will not only drive your property value down until it’s fixed, it also sucks to see everyone out on the water having a blast while you’re not able to. It’s best advised to have your equipment inspected by a waterfront professional sometime in the fall to give yourself plenty of time.  Once the schedule fills up for manufacturers and waterfront service shops, it can take weeks or months to get you a new part or get your equipment fixed. So make sure to see if your equipment will need a repair immediately to make sure you can be out there having fun with everyone else. If you feel more comfortable having an expert inspect your dock, feel free to reach out to us here at Deaton’s Waterfront Services. We will send a team out to inspect your equipment for a free quote. As always, feel free to contact us or give us a call at (317) 747-4933.

Things To Keep In Mind When Buying a Waterfront Home

Buying a home on the water is a great investment that will provide great views and hours of fun. However, the process of finding the perfect property is difficult. There are several factors to consider when inspecting a waterfront home. You need to make sure that the waterfront is in good condition, and will fit your needs. Real estate agents have no problem selling someone barely passable marine equipment to make a quick buck. Today we’ll look at a few things to keep in mind to make sure that you aren’t getting duped into buying a home that isn’t the right fit.

Waterfront Home

Factors to Consider When Inspecting A Waterfront Home

The Water

When buying a home on the water, you’ll first want to make sure that you’d like to live on the lake you’re looking at. You’ll want to make sure the water quality is good, the traffic isn’t too crazy, and check to see what the water levels typically are at every year. This step requires the most research but it’s important to see if you are the right fit for the lake community. In housing divisions and coves, it’s a good idea to watch the traffic of the lake during the evening hours. If there’s a lot of boat traffic, it’ll prevent you from having a peaceful evening if that’s what you seek.

To make sure the water is up to your standard, don’t be afraid to take a quick dip to decide. If the water stinks, is very murky, and full of algae you probably wouldn’t to live there. Obviously it’s a lot easier said than done to find the perfect lake, but patience is always key. The main takeaway you’ll need to see no matter the quality of water is the depth. Make sure your water is deep enough for boats to drive through. This is usually around 5′ – 8′. If the water is too shallow you won’t be able to own a dock or boat lift.

The Dock

The main reason someone would want to pay a premium to live on the water is because they want to get out and enjoy it. Part of that equation requires a boat dock, which needs to be in good condition or you’ll spend thousands more to replace it. When looking into a waterfront property, make sure to inspect the dock. Look at the decking, frames, and floats. If the decking is starting to warp, wood is starting to splinter, or nails are sticking out, then the decking will need replaced. Floats are also going to need replaced if they are barely holding a dock above water. Having to replace the decking or re-float the dock is the thing you’ll have to worry the least about as they are small repairs. If the frames are rusted, you’ll need to replace the dock entirely.

The whole point is to make sure you’re not spending hundreds of thousands of dollars on a house to have to spend thousands more to get on the water. If you find a great house but inspect to see that it has a terrible dock, the price should reflect that. It shouldn’t be the same price as a fully operational waterfront.

The Seawall

The final factor to consider when buying a waterfront home is the shoreline. Over time, water will erode sand and dirt away causing a shoreline to recede. This might not sound like a big problem, but losing land on your property is going to hurt your investment. To help protect your investment, check if the property you are looking at has a seawall. If it does, make sure that the wall is in good condition by looking for gaps or warps. You obviously don’t want to pay full price for a property if the seawall is going to need replaced. There is another form of protection that is cheaper and more natural, rip-rap. By placing stone down along the shoreline, it provides an extra layer of protection to prevent erosion. So if you don’t see a wall but do see a layer of rock, you’ll be OK. For more information about shoreline protection, check out our page here.

Buying a home on the water is a difficult process that you need to be prepared for. If there are times when you feel overwhelmed during the process, just think about the beautiful payoff on the water. Make sure that everything on the property is in working order and in good condition. If you need any equipment inspected, our expert team will do so free of charge and recommend a plan to restore working condition. Feel free to contact us for a free quote, or give us a call at (317) 747-4933.

Winter Waterfront Management: The Ultimate Guide

Winter is upon us and the lakes are frozen. Dock owners that have experience with the winter season are already well prepared and have their equipment safe. But what if you’re a new dock owner coming into your first winter? There is a lot of work to be down to protect your dock, boat, and PWCs. Today we’ll look at the steps needed to protect your investment and keep it as new as the last time you used it.

Winter Effects On Docks

During the winter, snow will accumulate on top of a dock and the water around it will freeze.  This will cause a lot of problems with a dock and other water equipment. Wood on a dock will warp over time from expanding and contracting with the different temperatures. Steel will rust and corrode over time, causing frames to break and cables to snap. All of these problems are going to happen over time whether your take proper steps for winterizing or not. Winterizing your dock is a matter of delaying the inevitable, it all comes down to keeping your annual maintenance costs down low.

If you live in Indiana, or any of the other surrounding states, you’re probably wondering what you should do with your dock in the winter. Our recommendation is to first check with your local waterfront experts by giving us a call for a free consultation. Our advice is better than just going with your gut instinct. However, it’s not hard to determine your best course of action for the winter. Here are some step’s we take to help ensure docks are kept in great condition throughout the winter:

Protect Your Shoreline From Erosion

One thing that gets overlooked when preparing for winter is your shoreline. Ice and snow will melt causing your shoreline to erode over time, so having a barrier will offer a method of preventing erosion. You can either install a seawall or lay down riprap to protect your property.  For more information about shoreline protection, be sure to check out our seawall page here.

Removing a Floating Dock During Winter

A common step for protecting your dock in the winter is to remove it if you have the means to do so. Fixed docks aren’t able to be removed, but they should never be installed in a lake that freezes in the first place because ice and snow can push pilings apart causing frames to warp. So if you own a floating dock, you can schedule your dock to be removed with Deaton’s or do so yourself. It’s recommended to store dock in a dry, flat surface. They can also be stored outside, but make sure you have tarped them off properly to prevent any water from reaching them. It’s a difficult process but it will pay off by preventing unnecessary damage.

Most modern docks won’t need to be removed due to the changes in dock manufacturing over the years. Instead of being all wood based or steel, materials such as composite decking or hot dipped galvanized frames hold up way better under duress. So if your dock is newer, or you own an EZ Dock system, don’t worry about removing your dock. Around the central Indiana region, it’s pretty uncommon to remove your dock for the winter if you live near the lake.

Preventing Ice with a Bubbler

Perhaps the easiest method of protecting your equipment during winter is to install a bubbler under your dock. A bubbler will push warm water underneath your dock up to the surface causing ice and snow to melt and preventing future accumulation.  It will keep everything nice and thawed! Ice won’t be able to form underneath your dock around the floats. A bubbler will protect your frames and keep your dock in the water where it’s supposed to be. There are different levels of power to bubblers to give them a larger circulation radius. For more information about bubblers, check out Kasco’s line here.

If you’re in need of maintenance on your dock due to winter damage, we’re here to help. Our expert team will diagnose any problems and recommend how to repair your equipment to as good as new! For more information, feel free to request a quote or give us a call at (317)747-4933.

How to Prepare Your Floating Dock for Winter

Winter time is almost upon us once again, which means that now is the time to prepare for it. During this down period where your dock isn’t getting as much activity as it would in the summer is the best time to inspect your dock and marine equipment and make sure any repairs get taken care of. This process may take about an hour, but it is worth it before something expensive breaks. While stationary docks aren’t usually in an area where they require winter maintenance, floating docks usually are. The best time to prepare your floating dock for winter is during the season where it is not used. Today, we’ll go over the things to look for to get you ready to winterize your floating dock.

Preparing Your Floating Dock For Winter

Checking the Anchoring

The first thing that you’ll want to check on your dock is the anchoring. You want to make sure your anchoring is still secure and in place. First, check your anchoring to see if there has been any movement. If there has been, you’ll want to contact your local waterfront expert to get it fixed and secure right away, or else you could walk out one day and wonder where your dock went.

Picture of Winch

If your dock is anchored by a cable system, you’ll want to check the cables to see if any are frayed. Check to also make sure that all clamps are still attached and secure. Inspect your winch to ensure that the toggle pin is still locking and can hold your winch in place. Grease all the gears to make sure they don’t rust over the winter. You’ll also want to give your anchors a little bit of slack to account for changing water levels from fall to spring.

If your dock is anchored by pipe or pilings, first check to make sure all the brackets and fittings are still secure. With pilings, make sure to check the piling hoop along with collar attached to the dock. If you have PVC covers, check to make sure they aren’t getting cracked, as they are cheap and easy to replace.

Inspecting Your Floating Dock

After ensuring the anchoring system is still in good condition, it’s time to inspect the dock. Walk around the perimeter of your dock and inspect the frames. Make sure there is no broken weld spots, loose bolts, or rust. If you find anything broken, make sure to arrange to get it repaired immediately.

The last thing you’ll need to worry about is your gangway. Make sure the pins are still secure in place and haven’t shown any signs of movement. Also check your hinges to see if they have shown any symptoms of loosening.

Get Ready for Winter Maintenance with Deaton’s

Getting your dock ready for the winter is a stressful process due to the amount of work it involves. Fortunately, the expert waterfront team here at Deaton’s Waterfront Services are here to help! If you are in the process of getting your dock ready for winter and aren’t sure what to do, feel free to contact us or give our office a call at (317) 747-4933. We are able to come out, inspect docks, and offer recommendations for getting your winterized. As always, stay safe!

 

 

Dock Hardware and Parts for DIY Dock Repair

Not every set of dock problems requires a total rebuild. Sometimes all it takes is a couple new parts to get things back on track. If your dock installation needs a little help, check out our selection of dock parts. When you have access to the right gear, it’s a lot easier to do your own repairs.

Top Dock Hardware for Your Project

Even docks that are installed correctly can use some upgraded parts now and again. Whether your dock repairs are from normal wear and tear or the unfortunate result of a major storm, we can help get you what you need to fix things up. If you aren’t exactly sure what that might be, just give us a call at (317) 747-4933.

1. Dock Anchoring Parts

Your dock needs to stay secure against wakes and wind. Swapping out broken brackets can help keep everything in the right place. We routinely work with EZ Dock anchoring components for floating docks. We can also help with your stationary dock parts. Our supplies include everything from standard pipe brackets to adjustable piling brackets and more.

2. Encapsulated Dock Floats

Having trouble with your dock floats? Deaton’s Waterfront Services can get you squared away. EZ Dock products are covered under a limited warranty. This makes it easy to repair cracks and leaks. Swap out your old dock floats for these models to extend the life of your floating dock.

3. Bolts and Screws for Docks

Older docks can struggle with rough weather. If you’re dealing with a bolt break, you know you need to get it replaced fast to keep everything else in order. New nuts and dock bolts can help you restore your system for another good season.

4. Hardware and Cleats

We’re proud to offer high-quality dock hardware for every type of dock setup. Consider adding extra dock cleats to give your dock more options for boat mooring, or look into other augers or pipe supports for a steadier build. Our dock parts shop can ship supplies to most any Midwest residential dock owner or commercial dock site.

5. Rubrail and Dock Bumpers

Making sure your dock has bumper around the perimeter can help protect boats and your dock from getting knocked around in choppy water. Damaged bumpers and old rubrail don’t usually work like they should. Give us a call if it’s time for an upgrade.

6. EZ Dock Accessories

Deaton’s Waterfront Services proudly represents EZ Dock in Indiana, Kentucky, Ohio, Illinois, Tennessee, and Missouri. When you need replacement parts for your EZ Dock setup, let us be your go-to shop. For general repairs, additional stability, or dock expansions and upgrades, we have the parts you need to keep your EZ Dock looking great.

Need Dock Parts? We Can Help!

Our team is always happy to consult with you on your dock project or new concept. We have over 30 years of experience to guide you through your designs and repairs. Let us help save you some time.

Tell us a little more about your current problem or what you think you need. Then we can recommend the right part for the job. Our parts include manufacturer warranties, and we can walk you through the process to do the work on your own. Or, you can have us come out to do the dock repair project for you. To learn more, feel free to give us a call or send us a message. We’re ready to help you fix anything!

Managing Safety Hazards on Public Waterfronts

Getting ready to enjoy another year on the water is always an exciting time. But you don’t want to overlook the proper safety protocols! Public waterfronts and commercial docks need to be especially careful about their equipment. Regular dock maintenance checks and being able to make necessary repairs quickly can help make the difference between a safe site and a tragic waterfront accident.

Waterfront safety hazards can be easily prevented when you work with the right experts. Here at Deaton’s Waterfront Services, we love helping boat launches and docks on public lakes, reservoirs, and other commercial waterfronts stay up to code. Two types of problems in particular can be a big cause for concern.

Accessibility on Commercial Docks

Our public parks and recreational areas are an invaluable part of our country, and a real source of enjoyment for so many people. In order to protect these sites and help make them available for everyone, the Americans with Disabilities Act (ADA) was signed into law in 1990. These standards cover fishing piers, floating structures, and other local or state facilities.

To be recognized as ADA-compliant dock, both fixed and floating waterfront structures need to be wheelchair-accessible. This helps ensure that people of all abilities can utilize public docks. Sites of all sizes—from small lakes to large marinas—are held accountable. Commercial docks and other public facilities need to pay special attention to these requirements, but sometimes certain features get overlooked.

If you ever need help maintaining your own ADA-compliant dock, just contact Deaton’s Waterfront Services. Our experienced team understands the importance of having accessible ramps, guardrails, curbing on the walkways, and other features for dock safety. We’re always happy to review your site to make sure it meets or exceeds the ADA standards.

Electrical Safety for Waterfronts

Public waterfronts also need to keep a close eye on their electronics. As we look forward to the summer season on the water, it’s important to remember that safety risks can exist anywhere on a dock or marina. Electrical hazards are especially dangerous for waterfronts. Marine industries have to work hard to protect the public against these concerns, but often, there’s a lot left to check.

While some regulations are already in place, electrical safety still makes headlines. Large conferences around the county address marina electrical safety every year—and for good reason. These types of waterfronts often work with a lot of electricity on and around the dock. If these electronics aren’t grounded properly, people swimming in the harbor can be at risk for electric shock drowning. The electrical systems for big marinas and around public lakes definitely need to be up to code. If you aren’t certain that everything is an order, you’re probably due for a dock inspection.

Talking with a waterfront services company can help you verify your dock’s safety features. In other situations, though, you might need to bring a marine electrician to your site. Regularly testing your setup can keep your guests safe.

Get Your Dock Up to Code

If you want to minimize the safety hazards on your public dock or waterfront, Deaton’s Waterfront Services can help. We have experience working with docks of all sizes. When you aren’t sure if your site is up to code, give our team a call at (317) 747-4933. We can either send someone to your location for an in-person tour, or schedule a video call to review your current setup.

Some of the best ways to make your site safe and secure are pretty easy to do. Make sure your wheelchair ramps are at the right angle, and update your rails and curbing to protect visitors from accidents.  A review of your existing electrical equipment is also important this time of year. For a truly successful season, don’t ignore waterfront safety. Partner with Deaton’s Waterfront Servicers to keep your site up to code and ADA-compliant all year long!

Dock Repair Prevention with Spring Maintenance

As residential and commercial waterfronts are getting ready for the spring season, there are a few key things dock owners need to watch. It’s a lot easier to enjoy your time on the water when you know that your equipment checks out. Just follow our checklist to confirm that your dock made it through the winter safe and sound.

Signs Your Dock Needs Maintenance

Early spring is the best time to check out your dock to make sure you’re ready for the upcoming season. February, March, or early April, are good times for assessing your waterfront.  Plus, if you used a bubbler in the winter to actuate the water, now’s the perfect time to take it out and put it back into storage.

Checking your dock in early spring is a good idea for both commercial waterfronts and residential properties. Homeowners, public docks, and other commercial sites on the water want to make sure their dock is safe for the years ahead. Regularly scanning your dock for loose connections and keeping an ear out for loud noises around your dock can help you catch any issues long before any major repairs are needed.

One sure sign that your dock will need spring maintenance is if you hear any obvious, loud noises when waves hit your dock. This is cause for concern because that racket could relate to metal-on-metal activity. If your dock equipment is knocking around too much, something can eventually break off and fall in the water.

Common Springtime Dock Repairs

In the Midwest, ice on the waterfronts typically comes off around Valentine’s Day. Scheduling preventative maintenance with a waterfront services company can help verify that all of your equipment survived the winter in one piece. If anything did go wrong, spring storms will just make those waterfront problems worse. Without preventative maintenance, some docks can even break in half. Then those parts can either sink to the bottom, or float away and go over a dam.

Some of the most common springtime dock repair problems relate to anchoring. Checking each one of your anchors, cables, and pipes is key for having a sturdy, stable dock. Spring is also the time to take a look at any floats that sit underneath your dock for support. These floats can sometimes pop out during winter, which can cause the dock to fall into the water later on. A thorough check will also cover the connections between your dock and bridge. These parts may need to be tighten every now and again, and spring is definitely the time to check.

Getting a Dock Repair Quote

A dock repair will happen at just about every site eventually. But if you’ve completed the necessary preventative maintenance, these problems are pretty easy to address. In general, the same rules apply to the small lakes in Northern Indiana, as to the huge lakes Kentucky or Tennessee!

If you need a professional to weigh in on your dock setup, you can always count on Deaton’s Waterfront Services. We take care with each dock inspection so you can get the information you need to make an informed decision. First, we review any weak points on your dock and let you know if there are any possibilities of failure in the next year. Then we can share suggestions on updates, as well as any short-term or long-term tips that might be helpful for your site.

A lot of times, you don’t even need to schedule an on-site visit with us. So if you’re on fence about whether you need a dock repair, please don’t hesitate to give Deaton’s Waterfront Services a call. We can easily get a clear vantage point of your site with a quick video-call. That way, you’ll get all the suggestions you need (whether you need new floats added, more screws down, etc.) and a dock repair quote with a much faster turn-around time.

You can even send us pictures of your dock to talk over your options. Our crew at Deaton’s is always happy to provide you with recommendations for custom dock updates or other repairs. We can even send you links and images to other dock projects we’ve worked on with past clients. Getting maintenance is great for your peace of mind around the water. If you have any questions, be sure to send us a message. We hope you have a great season ahead of you!

What to Check for a Winter-Ready Dock

When the temperatures start to drop, it makes sense to plan for winter. Preparing your dock should be just as important as making your other home arrangements. You want to make sure everything is in order before the real frost, snow, and ice set in. A little planning will help protect your dock through the elements—and give you a jumpstart to getting back on the water in the spring and summer.

Dock Winterization Tips and Maintenance

Organizing your waterfront property for winter isn’t always a fun task, but it’s an important process if your equipment is going to last. The general maintenance checks you do now can help you feel confident that your waterfront is prepped for any ice or harsh weather coming this season.

  • Check for loose bolts/connectors
  • Remove any ladders or ramps
  • Inspect boards for cracks
  • Tie a safety line (for floating docks)

Typically, dock owners can manage these steps on their own. But some cases may require a dock professional on site. If anything looks out of the ordinary with the items listed above, it’s probably time to call in the experts. Your dock might be in need of repairs before the fluctuating water depths and freezing temperatures do more damage.

Protecting Different Types of Docks

Depending on your dock type, you might need to complete a few other winterization steps. Following these general winterization tips is always a good idea as a minimum precaution. To really get specific about what your particular dock needs, pay attention to its material. Different dock types require their own winterization prep.

Stationary Docks

For the most part, permanent docks are designed to hold up against the winter elements. If your dock setup is in a protected area like a marina or cove, you’ll be just fine to leave your dock as-is for the winter. Lakes that are ½ mile across, however, may need to remove their docks for the winter. Open water between the dock and shoreline can cause problems throughout the season, so you’ll likely be better off removing the equipment from the water to protect it until spring.

Wooden Docks

Wooden docks often require more maintenance throughout the year. Fall and winter are no exception. As the weather starts to cool, it’s important to take time to inspect your dock’s sealant. If the boards can’t repel any water droplets, or you know the stain or sealant hasn’t been managed for a few years, it’s well worth it to do some touch-up work before the snow hits. Sand and re-seal any areas of your dock that look splintered, or just re-do the entire dock. Adding a layer of protection against the elements will help the equipment last and guard it against costly repairs and deterioration.

EZ Floating Docks

Docks made with materials like the EZ Dock systems are really great for winter-prep. (That’s one of the reasons we love working with their products!) Unless your dock is located on a river or other un-protected area, there’s really no reason to do anything special for your dock winterization. It can stay just like it is. EZ Dock panels only require a couple inches of water to float, so you don’t need to worry about damaging the underside of your dock. Plus, they hold up fine with ice. Most floating docks can move just fine with ice movements on lakes when they are not anchored—just remember to tie your safety line to a tree or other solid object on shore.

Need Help with Your Dock?

Reaching out to a waterfront company this time of year is an easy way to get ready for winter and the new year. Making plans for a new seawall installation or updated boat lift doesn’t have to wait until spring. In fact, finalizing those details during the colder months will let you jump right in to your new gear when the days warm up again. If you’ve got a project on the backburner, consider making some headway now. Then you can be ready to go for the entire waterfront season.

The team at Deaton’s Waterfront Services is proud to work with residential and commercial clients throughout the Midwest. We travel throughout Indiana, Illinois, Kentucky, Ohio, and Tennessee. If you need any help with your winterizing your dock, please don’t hesitate to give us a call at (317) 747-4933 or message Deaton’s Waterfront Services to get started.

Our dock and waterfront professionals are available year-round for project consultations and design work. We know you have dreams for your waterfront property. Let us help you make them a reality.